How to make a neon sign with rope in 5 steps – Real Homes

Save big bucks by making your own DIY Neon LED Rope Sign
During the first lockdown, my friend was converting her garage into a home gym and wanted help finding a neon sign to complete the makeover. Seeing how much custom signs were going for online, I decided to do some research into how to make a neon sign yourself.
I watched video after video but none were that helpful for someone without fancy equipment like a laser cutter, so I had to draw on my year 7 electronics class and make it up as I went along, recording it all so you can all make one too. You are welcome.
Neon rope light: materials required to create Jasmine Guerney's DIY LED light fixture
First up for this DIY project, you need to make a template for your light out of paper, in the size you want it. Have you decided what you want your sign to say? Or did you want a light shaped like a heart for example? Source your design or make your own on your computer. I used a free font website to find a font I liked, imported it and used a word document to save it as a PDF. Alternatively, you can make an image using websites such as Canva to make your template.
A computer aided design being created on Canva application for DIY LED light fixture
Tip: I found calligraphy-style fonts much easier to do as it requires fewer connections (in most cases), so bear in mind how each letter will flow to the next and how all the pieces of rope light will all join up when choosing your font.
I then used a site called Rasterbator.net to convert my image into a scaled-up, printable PDF to get it the size I wanted. It splits your design over multiple A4 pieces of paper you can print out and stick together.
Neon rope sign made by Jasmine Guerney with clear perspex sheet acrylic material and adhesive backing
Choose your backing
You can mount rope light on pretty much anything using superglue – wood, metal, plastic, whatever your design requires. I chose to mount mine on clear Perspex/sheet acrylic. I also cut mine to shape around my design and used a jigsaw, clamping the sheet between wood to prevent it shaking and cracking. You can file the edges smooth to give it a clean finish.
Neon rope light - step by step process of wiring lights to ensure a smooth circuit with template on living room floor
The first step in wiring the lights is to think of it like a long string, even though you need to cut the rope light to make each letter, there must not be any breaks in the circuit. Using your template, use your pen to draw this ‘string’ from the first letter to the last, thinking about how the wire will be hidden behind the letters and at what point they will join onto the next letter.
Once you have this all planned, it’s time to start using your template. If you’ve chosen a solid colour backing, you’ll want to cut out the letters and place the template on top. If using a clear acrylic, you can place the template behind it. Where the ends of the letters are (your entry and exit points for the wires), you’ll want to drill holes with your 4mm drill bit.
Neon rope sign - A close-up shot of Jasmine Guerney cutting out lettering for her DIY LED light fixture project
One end of your LED rope light doesn’t need to be wired, so your first letter, or part of a letter will only need wiring one side. To cut your first letter, line the rope up against your template. Look on the side of the rope light – one side should have a line and every so often you should see a little dark mark – this is your cut guide.  Choose the closest mark to where your letter ends and cut with a Stanley knife. Be careful not to cut anywhere other than these points. Inside the cut, you will see two little copper contact points. These is your positive and negative points where you need to solder the corresponding wires to. The positive is the bottom (by the flat base of the light) and the negative is the top (the coloured light side).
DIY Neon rope sign - a close up shot of Jasmine Guerney displaying positive and negative points
Neon rope sign DIY - Jasmine Guerney displaying close up of copper wires and preparing to use soldering iron
Grab your wire strippers and Stanley knife and separate the positive and negative wires. The positive will have a white stripe. If you have coloured wire, positive is red. Strip the ends to expose a centimetre of bare wire and twist the ends so all the little wires are intertwined. Using the holes you drilled, work out how much wire your first light will need to connect to the second, allowing about 5-10cm of wire extra to come up through the holes. 
** warning, soldering irons are very hot and melted solder can also burn skin**
Turn on your soldering iron on. Once hot, dab a bit of solder on the end of each of the wires. To do this, hold the tip hold your iron against the solder to melt off a small bead of metal, then hold it on the end of your wire to transfer the solder. It will set solid very quickly. Do this for both the positive and negative wires and add your end cap to the wire before you attach it to the light.
Position your wires on top of the corresponding contact points, remembering which way round the wires go from earlier. By re-melting the solder you put on the wire earlier, it will very quickly connect to the light. Just make sure the positive and negative don’t touch and the solder connecting the circuit aren’t melted into each other to prevent the light from shorting. You can then feed the rest of the wire through the backing and back up ready for the next strip of light.
Neon rope sign - step-by-step of Jasmine Guerney applying super glue to light strip
You can now use your superglue to stick the strip down. Apply some glue to the flat white base of the strip and hold it in place using your template as guidance. Be careful not to get glue anywhere else as it is practically impossible to get off acrylic cleanly. If your first piece has a sharp bend, you can use masking tape to hold it in place whilst the glue dries.
Repeat the above steps for each letter, using your string diagram to know where the wire is to go, adding end caps and feeding the wire through the holes as you go, using your power cable and adapter to check the connection for each one. You can do this by holding the red wire against the positive and black wire against the black. If it doesn’t light up, check your connections.
Neon rope sign DIY - Jasmine Guerney demonstrating how to overcome sharp corners and particular letters
If you have a letter with a sharp corner like an E or a T for example and the rope won’t bend easily, you can cut out a small triangle on the blank side of the rope (not the side that shows you where to cut) to allow it to bend.
Neon rope sign DIY - Jasmine Guerney holding copper wires to demonstrate how to separate and connect all positive wires and all negative wires separately
If you’ve done two or more lines of text on separate wires, you can finish each line with a metre or two long pieces of wire, depending on how far away your plug is from where your light will hang. To connect your light up to the adapter, you’ll need to connect all the positives and all the negatives together. You can do this by soldering them together – connecting the positives to the red wire and the negatives to the black wire of the adaptor. Wrap each set of wire in electrical tape or a shrink-wrap sleeve and ensure they don’t touch. 
Turn the sign over and start gluing down the wires behind where the light rope is so you can’t see them from the front.
Do your final power check and drill your holes to hang your sign, give your sign a clean with glass cleaner and hang it in place. You can use screws or standoff mounts for this. Stand back and admire the sign you’ve just successfully made!
Neon rope light DIY - final image of Jasmine Guerney installing LED lighting fixture on concrete brick wall wires separately
 Jasmine Gurney is a DIY pro, inspiring women with power tools via her home improvement blog Oh Abode and on Realhomes.com.

Plus there’s some pretty serious colour inspo here, too
By Amelia Smith • Published 3 April 22
Struggling to figure out how to use a coffee maker? We show you how to work your machine or coffeeware whether you’re working with ground coffee or whole beans
By Christina Chrysostomou • Published 3 April 22
Real Homes is part of Future plc, an international media group and leading digital publisher. Visit our corporate site.
© Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

source